Ultrasonic Thickness Gauges PCE-TG 75
- Supplied across the UAE
- +971 6 573 0911
The ultrasonic wall thickness gauges can measure material thicknesses up to 225 mm / 8.85". So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding speed of sound in the ultrasonic wall thickness gauges. For materials such as steel, aluminum, zinc, silver and gold, the appropriate sound speeds are already stored in the device library. This means that the ultrasonic wall thickness gauges can be used universally.
With the limit value function in the ultrasonic wall thickness gauges, individual maximum and minimum values can be stored. If the measured value of the test piece is outside the limits, the ultrasonic wall thickness gauges signals this visually. If necessary, the signaling can also be done acoustically by the ultrasonic wall thickness gauges in addition to the visual display. This is why the ultrasonic wall thickness gauges is used, for example, in quality assurance and in incoming goods inspections.
The ultrasonic wall thickness gauges has a data memory on which the measured values can be recorded. After a measurement sequence, the stored measurement values can be analyzed directly on the ultrasonic wall thickness gauges. The stored data are graphically displayed by the ultrasonic wall thickness gauges. In addition, each individual measuring point can be approached and read in the graphics of the ultrasonic wall thickness gauges. For a simplified analysis of the measured values, the average, the largest and smallest measured value is displayed on the ultrasonic wall thickness gauges.
Data sheet
Technical details
| Measuring range | 1.00 ... 225.0 mm / 0.04 ... 8.85" |
| Resolution | 0.01 mm at ≤99.99 mm 0.1 mm at ≥100.0 mm |
| Accuracy | ±0.5 % of measured value + 0.05 mm |
| Storage space | 500 measured values |
| Probe frequency | 5 MHz |
| Standard sensor | sensor PCE-TG 5M10d |
| Dimensions | 163 x 82 x 38 mm / 6.4 x 3.2 x 1.5" |
| Weight | 320 g / 11.2 oz |
| Power supply | 3 x 1.5 V AA batteries |
| Automatic switch-off | switched off, 2, 5, 10, 30 minutes |
| Display | 2.4 inch TFT LCD color display with brightness adjustment |
| Calibration reference | 4 mm |
| Adjustable speed of sound | 1000 ... 9999 m/s |
| Smallest pipe diameter | Ø20 x 3 mm (steel) |
| Material library | 15 memory locations |
- Measured value memory
- Calibration reference on the housing
- Automatic shutdown
- Material thickness measurement up to 225 mm / 8.85"
- Battery status indicator
- Optionally with ISO calibration certificate


