Bending testing machine 300kN
The bending testing machine is suitable for bending tensile strength tests of various steel fibre concretes, concrete beams and shotcrete. A position measuring system is installed in the cylinder by default. The massive steel frame is extremely stiff, the columns are tensioned without any play. High accuracy class 1 according to DIN EN 7500-1 in a very wide measuring range.
Norms: DAfStb Guideline / DBV annex, EN 14651- CMOD, EN 14488-3, EN 14888-5, EN 12390-5, SIA 162/6, ASTM C1550, ASTM C1609, ASTM C1399, Barcelona Test (and many more, if necessary) - Accessories required
Technical Specification
| Frame type | 4-column frame |
|---|---|
| Force display range | 0 - 300 kN |
| Force measuring range | 3 - 300 kN, class 1 |
| Stroke | 250 mm |
| Distance between columns | Front 960 mm / Side 610 mm |
| Bending roll length | 510 mm |
| Bending roll diameter | Ø 30 mm |
| Distance between upper bending rolls | 75 - 340 mm |
| Distance between lower bending rolls | 70 - 1020 mm |
Control Unit, Safety and Dimensions
| Control Unit | Doli EDC provides fully automated experimental procedures with predetermined rate of loading, force controlled tests (deformation and displacement controlled tests require further accessories), automatic break detection. |
|---|---|
| Safety | A large area of the testing machine can be equipped optionally with an impact-resistant, transparent test room protection made of polycarbonate. |
| Dimensions | Test frame: (W x D x H) 1200 x 850 x 2450 mm Weight: approx. 4300 kg Control cabinet: (W x D x H) 1200 x 570 x 1040 mm Weight: approx. 350 kg 3 ~ 400 V / 50 Hz - 1.5 kW |