Bending testing machine 100 kN for hardened concrete, concrete beams, slabs and curbs
The flexure testing machine is suitable for flexural tensile strength testing of a wide variety of concrete specimens, such as concrete beams, curbs, concrete slabs, bricks, etc. The solid steel frame is extremely torsion-resistant, the columns are clamped without any play. A displacement measuring system can be optionally installed in the cylinder, allowing displacement and deformation controlled tests.
Norms: DIN EN 12390-5, 1339, 1340, ASTM C78, C293, C469, C496, C1019, C109/C109M
Technical Data
Frame type | 4-column |
---|---|
Force display range | 0 - 100 kN |
Force measuring range | 1 - 100 kN, class 1 |
Stroke | 220 mm |
Distance between columns | Front 900 mm / Side 800 mm |
Bending roll length | 620mm |
Bending roll diameter | Ø 40 mm |
Bending roll distance at the bottom | 80 - 840 mm |
Control Unit, Safety and Dimensions
Control Unit | Doli EDC provides fully automated experimental procedures with predetermined rate of loading force controlled tests (deformation and displacement controlled tests require further accessories). Automatic break detection. |
---|---|
Safety | The testing machine is equipped with an impact-resistant, transparent polycarbonate test chamber made of polycarbonate. |
Dimensions | Test frame: (W x D x H) = 1110 x 680 x 2000 mm Weight: approx. 1000 kg Control cabinet: (W x D x H) = 1200 x 570 x 1050 mm Weight: approx. 280 kg 3 ~ 400 V / 50 Hz / 1,1 kW |