Vicat needle apparatus 12 measuring points
According to EN 196-3 and EN 480-2 optional equipment is required*
Construction
| The 12 measuring points (4/4/4) are in a rectangular trough installed, which is into a stainless steel workbench integrated |
| Tests can be performed in air or in water bath with constant temperature (heat exchanger and cooler for constant water temperature included) |
| Programmed test sequences |
| Automatic registration of the beginning and of the end of setting time, as well as of setting plots |
|---|
| Weight of plunger and the Vicat needle are an additional 300 g ± 1 g |
| After each penetration the Vicat needle is automatically cleaned |
Scope of Delivery
| Base unit as a floor-mounted appliance with the control unit |
| Standard software for programmable test sequences and for data recording |
| 12 Vicat moulds (conical hard plastic ring) 70/80 dia. x 40 mm |
| 12 glass base plates, 120 mm dia. |
| 12 centerings for Vicat moulds (conical hard plastic ring) 70/80 dia. x 40 mm |
| 2 pair of cleaning brushes |
| 1 tee wrench, 1.25 mm |
| 1 tee wrench, 2 mm |
| 2 spare glass plates, 120 mm dia. |
| 2 spare initial-set needles, 1.13 mm dia. |
| Filter sponge coarse |
| Filter sponge fine |
| Serial cable |
| USB / RS232-Adapter |
| Power supply |
Important Note
| For standard EN 480-2 the additional weight 1.0366.10, the plunger 1.0366.12 and optionally the extra cooling unit 1.0366.13 for a test temperature of 5°C are required |
| For operation is a standard PC or laptop required, which is not included in the scope of delivery |
Dimensions
| (W x D x H) = 1000 x 700 x 1140 mm Weight: 195 kg 110 - 230 V / 50 - 60 Hz |