PC-controlled Vicat needle apparatus, 8 points
According to EN 196-3, EN 480-2** optional equipment is required.
Construction
| The 8 measuring points (2 x 4) are installed in a rectangular trough |
| Tests can be performed in air or in water bath with constant temperature (heat exchanger and cooler for constant water temperature) |
| Programmed test sequences |
| Automatic registration of the beginning and of the end of setting time, as well as of setting plots |
| Weight of plunger and the Vicat needle are an additional 300 g ± 1 g |
| After each penetration the Vicat needle is automatically cleaned |
Scope of Delivery
| Base unit as a table model with the control unit |
| Standard software for programmable test sequences and for data recording |
| 8 Vicat moulds (conical hard plastic ring) 70/80 dia. x 40 mm |
| 8 glass base plates, 120 mm dia. |
| 8 centerings for Vicat moulds (conical hard plastic ring) 70/80 dia. x 40 mm |
| 2 pair of cleaning brushes |
| 1 tee wrench, 1.25 mm |
| 1 tee wrench, 2 mm |
| 2 spare glass plates, 120 mm dia. |
| 2 spare initial-set needles, 1.13 mm dia. |
| Filter sponge coarse |
| Filter sponge fine |
| Serial cable |
| USB / RS232-Adapter |
| Mains cable |
Important Note
| For standard EN 480-2 the additional weight 1.0366.10, the plunger 1.0366.12 and optionally the extra cooling unit 1.0366.13 for a test temperature of 5°C are required |
| For operation is a standard PC or laptop required, which is not included in the scope of delivery |
Dimensions
|
(W x D x H) = 700 x 600 x 600 mm Weight: 62 kg 110 - 230 V / 50 - 60 Hz |